PartsTable
Technical Data Sheet
Download PDF

BACN10DZ3-150 — NUT,SELF-LOCKING,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BACN10DZ3-150: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2014 OVERALL, nut_style: PLATE, nut_height: 1.910 INCHES MINIMUM AND 1.970 INCHES MAXIMUM IN, nut_length: 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN, plate_width: 1.480 INCHES MINIMUM AND 1.550 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-897-3569, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACN10DZ3-150
NSN: 5310-00-897-3569
FSC: 5310 — Nuts and Washers
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OVERALL
nut_stylePLATE
nut_height1.910 INCHES MINIMUM AND 1.970 INCHES MAXIMUM IN
nut_length1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
plate_width1.480 INCHES MINIMUM AND 1.550 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
locking_featurePREVAILING TORQUE ALL METAL DESIGN
plate_thickness0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentANODIZE OR CHROMATE OVERALL
nominal_thread_size0.190 INCHES IN
NSN5310-00-897-3569
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACN10DZ3-150 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
NUT LENGTH: 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 1,CLASS1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
PLATE WIDTH: 1.480 INCHES MINIMUM AND 1.550 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-367 COMP 2014 T6 FED STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NUT LENGTH1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1,CLASS1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
PLATE WIDTH1.480 INCHES MINIMUM AND 1.550 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
DISTANCE FROM BASE TO CENTER OF APERTURE0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-367 COMP 2014 T6 FED STD SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
WSI32-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BACN10DZ3-150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACN10DZ3-150?
BACN10DZ3-150 is a NUT,SELF-LOCKING,PLATE.
What parts can replace BACN10DZ3-150?
There is 1 known substitute for BACN10DZ3-150: WSI32-15. Substitute compatibility should be verified for your specific system.
What is the NSN for BACN10DZ3-150?
BACN10DZ3-150 is cataloged in the U.S. Government catalog under NSN 5310-00-897-3569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACN10DZ3-150

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.