PartsTable
Technical Data Sheet
Download PDF

BACN10DR16D — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BACN10DR16D: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, nut_style: HEXAGON, nut_height: 0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT (UNJ), special_features: TWO DRILLED LOCKWIRE HOLES IN HEX 180 DEG APART,0.070 IN. DIA HOLES,1.524 IN.

C TO C OF HOLES IN. This part is cataloged in the U.S. Government catalog under NSN 5310-00-466-7549, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACN10DR16D
NSN: 5310-00-466-7549
FSC: 5310 — Nuts and Washers
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
nut_styleHEXAGON
nut_height0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT (UNJ)
special_featuresTWO DRILLED LOCKWIRE HOLES IN HEX 180 DEG APART,0.070 IN. DIA HOLES,1.524 IN. C TO C OF HOLES IN
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
width_across_flats1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
nominal_thread_size1.312 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
NSN5310-00-466-7549
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACN10DR16D · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT (UNJ)
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6,T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T851 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.312 INCHES IN
•
SPECIFICATION/STANDARD DATA: 81205-BACN10DR MANUFACTURERS STANDARD
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT (UNJ)
HOLE CONFIGURATION STYLECONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T851 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.312 INCHES IN
SPECIFICATION/STANDARD DATA81205-BACN10DR MANUFACTURERS STANDARD
NUT HEIGHT0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
DRILLED HOLE DIAMETER0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
BACN10DRReference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACN10DR16D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACN10DR16D?
BACN10DR16D is a NUT,PLAIN,HEXAGON.
What parts can replace BACN10DR16D?
There is 1 known substitute for BACN10DR16D: BACN10DR. Substitute compatibility should be verified for your specific system.
What is the NSN for BACN10DR16D?
BACN10DR16D is cataloged in the U.S. Government catalog under NSN 5310-00-466-7549. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACN10DR16D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.