PartsTable
Technical Data Sheet
Download PDF

BACHN10HY4M — NUT,PLAIN,ASSEMBLED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

BACHN10HY4M: NUT,PLAIN,ASSEMBLED WASHER.

The NUT,PLAIN,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL WASHER, nut_style: RECESSED, nut_height: 0.263 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, overall_height: 0.274 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-959-4688, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACHN10HY4M
NSN: 5310-00-959-4688
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL WASHER
nut_styleRECESSED
nut_height0.263 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
overall_height0.274 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
washer_outside_diameter0.460 INCHES MAXIMUM IN
thread_quantity_per_inch28
NSN5310-00-959-4688
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: BACHN10HY4M · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.460 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.274 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.460 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.263 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
BACN10FZ4Reference document
Same NSN cross-reference
Reference document — Secondary reference
TLN1000-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LH6094-048Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACN10HY4MReference document
Same NSN cross-reference
Reference document — Secondary reference
55342-428Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACN10HYReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACHN10HY4M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACHN10HY4M?
BACHN10HY4M is a NUT,PLAIN,ASSEMBLED WASHER.
What parts can replace BACHN10HY4M?
There are 6 known substitutes for BACHN10HY4M: BACN10FZ4, TLN1000-4, LH6094-048 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BACHN10HY4M?
BACHN10HY4M is cataloged in the U.S. Government catalog under NSN 5310-00-959-4688. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACHN10HY4M

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.