PartsTable
Technical Data Sheet
Download PDF

BACH10G4C — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BACH10G4C: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE OVERALL, overall_length: 4.855 INCHES MINIMUM AND 4.885 INCHES MAXIMUM IN, handle_clearance: 2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF, material_document_and_classification: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-168-3176, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACH10G4C
NSN: 5340-01-168-3176
FSC: 5340 — Hardware, Commercial
CAGE: 55081 — FRANKLIN ELECTRONICS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE OVERALL
overall_length4.855 INCHES MINIMUM AND 4.885 INCHES MAXIMUM IN
handle_clearance2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM IN
NSN5340-01-168-3176
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BACH10G4C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
HANDLE CLEARANCE: 2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 303 OR STEEL COMP 303SE OVERALL
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.855 INCHES MINIMUM AND 4.885 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.190 INCHES IN
HANDLE CLEARANCE2.000 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
MATERIALSTEEL COMP 303 OR STEEL COMP 303SE OVERALL
THREAD SERIES DESIGNATORUNF
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy BACH10G4C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACH10G4C?
BACH10G4C is a HANDLE,BOW.
What is the NSN for BACH10G4C?
BACH10G4C is cataloged in the U.S. Government catalog under NSN 5340-01-168-3176. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACH10G4C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.