PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BACG20C24
BACG20C24 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.062 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.375 INCHES NOMINAL IN, overall_height: 0.375 INCHES NOMINAL IN, flange_thickness: 0.156 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-202-1500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACG20C24
NSN: 5325-00-202-1500
FSC: 5325
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.062 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.375 INCHES NOMINAL IN
overall_height0.375 INCHES NOMINAL IN
flange_thickness0.156 INCHES NOMINAL IN
groove_outside_diameter0.562 INCHES NOMINAL IN
grommet_construction_typeSPLIT
nonmetallic_hardness_rating50.0 MINIMUM SHORE DUROMETER A AND 60.0 MAXIMUM SHORE DUROMETER A
large_flange_outside_diameter0.750 INCHES NOMINAL IN
material_document_and_classificationMIL-G-3036 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5325-00-202-1500
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: BACG20C24 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET CONSTRUCTION TYPE: SPLIT
•
FLANGE THICKNESS: 0.156 INCHES NOMINAL IN
•
NONMETALLIC HARDNESS RATING: 50.0 MINIMUM SHORE DUROMETER A AND 60.0 MAXIMUM SHORE DUROMETER A
•
GROOVE OUTSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
GROOVE WIDTH: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3036 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
GROMMET CONSTRUCTION TYPESPLIT
FLANGE THICKNESS0.156 INCHES NOMINAL IN
OVERALL HEIGHT0.375 INCHES NOMINAL IN
NONMETALLIC HARDNESS RATING50.0 MINIMUM SHORE DUROMETER A AND 60.0 MAXIMUM SHORE DUROMETER A
GROOVE OUTSIDE DIAMETER0.562 INCHES NOMINAL IN
GROOVE WIDTH0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3036 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
LARGE FLANGE OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
GROMMET STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
8062Interchangeable
interchangeable cross-reference
interchangeable
9962Interchangeable
interchangeable cross-reference
interchangeable
TMT-99-62Interchangeable
interchangeable cross-reference
interchangeable
9100-1732Interchangeable
interchangeable cross-reference
interchangeable
9062Interchangeable
interchangeable cross-reference
interchangeable
MW024CSX000020UNCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BACG20C24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACG20C24?
BACG20C24 is a GROMMET,NONMETALLIC.
What parts can replace BACG20C24?
There are 15 known substitutes for BACG20C24: 8062, 9962, TMT-99-62 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BACG20C24?
BACG20C24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-202-1500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACG20C24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026