PartsTable
Technical Data Sheet
Download PDF

BACC15AN10 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BACC15AN10: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, material: STEEL COMP 301 OVERALL, hole_diameter: 0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN, overall_height: 0.670 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-055-1670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACC15AN10
NSN: 5340-01-055-1670
NIINs: 010551670, 016694592
FSC: 5340 — Hardware, Commercial
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
width0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
length0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
materialSTEEL COMP 301 OVERALL
hole_diameter0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
overall_height0.670 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentPASSIVATE OVERALL
material_thickness0.030 INCHES NOMINAL IN
end_item_identificationKC-46 AIRCRAFT
material_document_and_classificationMIL-S-5059,1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN5340-01-055-1670
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BACC15AN10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
WIDTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.670 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN
LENGTH0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
WIDTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
MATERIALSTEEL COMP 301 OVERALL
HOLE DIAMETER0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACC15AN10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACC15AN10?
BACC15AN10 is a CLIP,SPRING TENSION.
What is the NSN for BACC15AN10?
BACC15AN10 is cataloged in the U.S. Government catalog under NSN 5340-01-055-1670. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACC15AN10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.