PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BACC10K3
BACC10K3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, lug_width: 0.468 INCHES NOMINAL IN, overall_width: 0.375 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-790-5299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACC10K3
NSN: 5340-00-790-5299
FSC: 5340
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
lug_width0.468 INCHES NOMINAL IN
overall_width0.375 INCHES NOMINAL IN
style_designatorRIGHT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.187 INCHES NOMINAL IN
specification/standard_data81205-BACC10K MANUFACTURERS SPECIFICATION
material_document_and_classificationQQ-A-250/5 TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.639 INCHES NOMINAL IN
NSN5340-00-790-5299
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BACC10K3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.187 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.453 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 81205-BACC10K MANUFACTURERS SPECIFICATION
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.234 INCHES NOMINAL IN
•
LUG WIDTH: 0.468 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.187 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.453 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81205-BACC10K MANUFACTURERS SPECIFICATION
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 TEMPER 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALALUMINUM ALLOY 2024 BAND
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.234 INCHES NOMINAL IN
LUG WIDTH0.468 INCHES NOMINAL IN
LUG HOLE DIAMETER0.199 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
7943Interchangeable
interchangeable cross-reference
interchangeable
M-2Interchangeable
M2
interchangeable
00400-0302Interchangeable
interchangeable cross-reference
interchangeable
139-32Interchangeable
interchangeable cross-reference
interchangeable
10079430AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BACC10K3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACC10K3?
BACC10K3 is a CLAMP,LOOP.
What parts can replace BACC10K3?
There are 5 known substitutes for BACC10K3: 7943, M-2, 00400-0302 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BACC10K3?
BACC10K3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-790-5299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACC10K3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026