PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BACC10K105
BACC10K105 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, lug_width: 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN, overall_width: 0.690 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-014-0085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACC10K105
NSN: 5340-01-014-0085
FSC: 5340
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
diameter0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
lug_width0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
overall_width0.690 INCHES NOMINAL IN
style_designatorRIGHT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material_thickness0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
loop_inside_diameter0.625 INCHES NOMINAL IN
specification/standard_data81205-BACC10K MANUFACTURERS SPECIFICATION
integral_nut_type_and_quantity1 SELF-LOCKING EQUAL LENGTH TONGUES
cushioning_environmental_protectionWEATHER RESISTANT
NSN5340-01-014-0085
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BACC10K105 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.562 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
DIAMETER: 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
LUG HOLE DIAMETER: 0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.562 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
OVERALL WIDTH0.690 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
DIAMETER0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
LUG HOLE DIAMETER0.189 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
MATERIAL THICKNESS0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
7685Interchangeable
interchangeable cross-reference
interchangeable
T0V10N0125SETF0R72VInterchangeable
interchangeable cross-reference
interchangeable
GS4843Interchangeable
interchangeable cross-reference
interchangeable
5711-1/4INInterchangeable
interchangeable cross-reference
interchangeable
785-1-1/4Interchangeable
interchangeable cross-reference
interchangeable
PA6745Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BACC10K105?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACC10K105?
BACC10K105 is a CLAMP,LOOP.
What parts can replace BACC10K105?
There are 11 known substitutes for BACC10K105: 7685, T0V10N0125SETF0R72V, GS4843 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BACC10K105?
BACC10K105 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-014-0085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACC10K105

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026