PartsTable
Technical Data Sheet
Download PDF

BACC10GE5C — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BACC10GE5C: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, material_thickness: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN, loop_inside_diameter: 0.313 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-075-3177, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACC10GE5C
NSN: 5340-00-075-3177
NIINs: 000753177, 016701613
FSC: 5340 — Hardware, Commercial
CAGE: 17765 — THE BOEING COMPANY DIV COMMERCIAL (USA)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialRUBBER SILICONE CLASS Q CUSHION
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
material_thickness0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter0.313 INCHES NOMINAL IN
end_item_identificationKC-46 AIRCRAFT
material_document_and_classificationAMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.778 INCHES NOMINAL IN
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
center_to_center_distance_between_loop_and_mounting_hole0.560 INCHES NOMINAL IN
NSN5340-00-075-3177
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BACC10GE5C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE BAND
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.778 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.560 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 321 OR STEEL COMP 347 BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE BAND
DIAMETER0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.778 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.560 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 OR STEEL COMP 347 BAND
MATERIALRUBBER SILICONE CLASS Q CUSHION
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
400WSS5Reference document
Same NSN cross-reference
Reference document — Secondary reference
S369WSSH5Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
TA12C32WH5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
JM44LC13WH5RSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
509SS5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACC10GE5C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACC10GE5C?
BACC10GE5C is a CLAMP,LOOP.
What parts can replace BACC10GE5C?
There are 5 known substitutes for BACC10GE5C: 400WSS5, S369WSSH5, TA12C32WH5 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BACC10GE5C?
BACC10GE5C is cataloged in the U.S. Government catalog under NSN 5340-00-075-3177. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACC10GE5C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.