BACC10GE2C — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

BACC10GE2C: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 OR STEEL COMP 347 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-225-9670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

BACC10GE2C

NSN: 5340-01-225-9670
FSC: 5340 — Hardware, Commercial
CAGE: 81205 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

diameter	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 OR STEEL COMP 347 BAND
overall_width	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features	REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter	0.125 INCHES NOMINAL IN
material_document_and_classification	AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.675 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.457 INCHES NOMINAL IN
NSN	5340-01-225-9670

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND

•

DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.675 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND
DIAMETER	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.675 INCHES NOMINAL IN
SPECIAL FEATURES	REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.457 INCHES NOMINAL IN
MATERIAL	STEEL COMP 321 OR STEEL COMP 347 BAND

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 5

S369WSSH2Reference document

Same NSN cross-reference

Reference document — Secondary reference

TA12C32WH2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

JM44LC13WH2RSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SS369WSSH2Reference document

Same NSN cross-reference

Reference document — Secondary reference

S714WSSH2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy BACC10GE2C?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is BACC10GE2C?

BACC10GE2C is a CLAMP,LOOP.

What parts can replace BACC10GE2C?

There are 5 known substitutes for BACC10GE2C: S369WSSH2, TA12C32WH2, JM44LC13WH2R and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for BACC10GE2C?

BACC10GE2C is cataloged in the U.S. Government catalog under NSN 5340-01-225-9670. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

BACC10GE2C — CLAMP,LOOP

Request a Quote — BACC10GE2C