The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 OR STEEL COMP 347 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-224-8369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
BACC10GE15C
NSN:5340-01-224-8369 NIINs:012248369, 016879418 FSC:5340 — Hardware, Commercial CAGE:81205 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
diameter
0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
STEEL COMP 321 OR STEEL COMP 347 BAND
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features
REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
material_thickness
0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter
0.938 INCHES NOMINAL IN
end_item_identification
KC-46 AIRCRAFT
material_document_and_classification
AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end
1.076 INCHES NOMINAL IN
reference_number_differentiating_characteristics
ITEM IS FAA CERTIFIED
NSN
5340-01-224-8369
COMPONENT DIAGRAM
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.076 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND
DIAMETER
0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.076 INCHES NOMINAL IN
SPECIAL FEATURES
REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN
TONGUE HOLE TYPE
ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACC10GE15C?
BACC10GE15C is a CLAMP,LOOP.
What parts can replace BACC10GE15C?
There are 6 known substitutes for BACC10GE15C: BACC10GE14C, JM44LC13WH14R, JM44LC13WH15R and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BACC10GE15C?
BACC10GE15C is cataloged in the U.S. Government catalog under NSN 5340-01-224-8369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.