PartsTable
Technical Data Sheet
Download PDF

BACC10EP32 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BACC10EP32: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 OR STEEL COMP 347 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.064 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-020-6328, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACC10EP32
NSN: 5340-01-020-6328
FSC: 5340 — Hardware, Commercial
CAGE: 82918 — THE BOEING COMPANY DIV LEGACY WICHITA (USA)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL COMP 321 OR STEEL COMP 347 BAND
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.064 INCHES NOMINAL IN
loop_inside_diameter2.000 INCHES NOMINAL IN
specification/standard_data81205-BACC10EP MANUFACTURERS SPECIFICATION
cushioning_environmental_protectionFLAME RESISTANT
distance_from_loop_center_to_tongue_end1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.500 INCHES NOMINAL IN
NSN5340-01-020-6328
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BACC10EP32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: FLAME RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 81205-BACC10EP MANUFACTURERS SPECIFICATION
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONFLAME RESISTANT
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA81205-BACC10EP MANUFACTURERS SPECIFICATION
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 OR STEEL COMP 347 BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
UMPC0S300-32Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy BACC10EP32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACC10EP32?
BACC10EP32 is a CLAMP,LOOP.
What parts can replace BACC10EP32?
There is 1 known substitute for BACC10EP32: UMPC0S300-32. Substitute compatibility should be verified for your specific system.
What is the NSN for BACC10EP32?
BACC10EP32 is cataloged in the U.S. Government catalog under NSN 5340-01-020-6328. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACC10EP32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.