PartsTable
Technical Data Sheet
Download PDF

BACB30LU7-45 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

BACB30LU7-45: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 2.8025 INCHES MINIMUM AND 2.8225 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN, head_diameter: 0.809 INCHES MINIMUM AND 0.892 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-435-3897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACB30LU7-45
NSN: 5305-01-435-3897
FSC: 5305 — Screws
CAGE: 06725 — SPS TECHNOLOGIES, LLC DBA AIR INDUSTRIES COMPANY DIV AIR INDUSTRIES COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP E4340 OR STEEL COMP 8740 OVERALL
head_styleFLAT COUNTERSUNK
grip_length2.8025 INCHES MINIMUM AND 2.8225 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
head_diameter0.809 INCHES MINIMUM AND 0.892 INCHES MAXIMUM IN
thread_length0.694 INCHES NOMINAL IN
fastener_length3.4915 INCHES MINIMUM AND 3.5215 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
NSN5305-01-435-3897
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: BACB30LU7-45 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 3.4915 INCHES MINIMUM AND 3.5215 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.694 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.4375 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 2.8025 INCHES MINIMUM AND 2.8225 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH3.4915 INCHES MINIMUM AND 3.5215 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.694 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.4375 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH2.8025 INCHES MINIMUM AND 2.8225 INCHES MAXIMUM IN
GRIP DIAMETER0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BACB30LU7-45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACB30LU7-45?
BACB30LU7-45 is a SCREW,CLOSE TOLERANCE.
What is the NSN for BACB30LU7-45?
BACB30LU7-45 is cataloged in the U.S. Government catalog under NSN 5305-01-435-3897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACB30LU7-45

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.