PartsTable
Technical Data Sheet
Download PDF

BACB10C227 — BEARING,ROLLER,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

BACB10C227: BEARING,ROLLER,ROD END.

The BEARING,ROLLER,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, shank_style: SOLID, bore_diameter: 0.1900 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 2.3060 INCHES NOMINAL IN, shank_diameter: 0.4450 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-809-1807, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACB10C227
NSN: 3110-00-809-1807
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 82918 — THE BOEING COMPANY DIV LEGACY WICHITA (USA)
SPECIFICATIONS
materialSTEEL ROLLER
shank_styleSOLID
bore_diameter0.1900 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
overall_length2.3060 INCHES NOMINAL IN
shank_diameter0.4450 INCHES NOMINAL IN
shield_quantity2
inner_ring_width0.4370 INCHES NOMINAL IN
outer_ring_width0.3500 INCHES NOMINAL IN
style_designatorSINGLE ROW, CONCAVE ROLLERS
bearing_seal_typeCONTACT
NSN3110-00-809-1807
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: BACB10C227 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.4450 INCHES NOMINAL IN
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3500 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: SINGLE ROW, CONCAVE ROLLERS
•
OVERALL OUTSIDE DIAMETER: 0.8000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.4450 INCHES NOMINAL IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3500 INCHES NOMINAL IN
SHIELD QUANTITY2
STYLE DESIGNATORSINGLE ROW, CONCAVE ROLLERS
OVERALL LENGTH2.3060 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.8000 INCHES NOMINAL IN
SELF-ALIGNMENT ANGLE10.00 DEGREES NOMINAL
SHANK STYLESOLID
SUBSTITUTES & CROSS-REFERENCES 2
BACB10C227HReference document
Same NSN cross-reference
Reference document — Secondary reference
RP3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BACB10C227?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACB10C227?
BACB10C227 is a BEARING,ROLLER,ROD END.
What parts can replace BACB10C227?
There are 2 known substitutes for BACB10C227: BACB10C227H, RP3. Substitute compatibility should be verified for your specific system.
What is the NSN for BACB10C227?
BACB10C227 is cataloged in the U.S. Government catalog under NSN 3110-00-809-1807. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACB10C227

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.