PartsTable
Technical Data Sheet
Download PDF

BACB10BH211CF5 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

BACB10BH211CF5: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP E50100 ROLLER, stud_length: 0.6090 INCHES NOMINAL IN, stud_diameter: 0.3117 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, overall_length: 0.9850 INCHES NOMINAL IN, outer_ring_width: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN, special_features: LUB FITTING MUST BE FLUSH OR BELOW THE SURFACE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-033-8189, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACB10BH211CF5
NSN: 3110-01-033-8189
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 92563 — MCGILL MANUFACTURING CO, INC (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP E50100 ROLLER
stud_length0.6090 INCHES NOMINAL IN
stud_diameter0.3117 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
overall_length0.9850 INCHES NOMINAL IN
outer_ring_width0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
special_featuresLUB FITTING MUST BE FLUSH OR BELOW THE SURFACE
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
lubrication_materialGREASE
overall_outside_diameter0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
surface_treatment_document_and_classificationQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-033-8189
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: BACB10BH211CF5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
•
OVERALL OUTSIDE DIAMETER: 0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE ROLLER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE STUD
OVERALL LENGTH0.9850 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN
STUD LENGTH0.6090 INCHES NOMINAL IN
SPECIAL FEATURESLUB FITTING MUST BE FLUSH OR BELOW THE SURFACE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
HRT3CFN5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACB10BH211CF5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACB10BH211CF5?
BACB10BH211CF5 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace BACB10BH211CF5?
There is 1 known substitute for BACB10BH211CF5: HRT3CFN5. Substitute compatibility should be verified for your specific system.
What is the NSN for BACB10BH211CF5?
BACB10BH211CF5 is cataloged in the U.S. Government catalog under NSN 3110-01-033-8189. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACB10BH211CF5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.