PartsTable
Technical Data Sheet
Download PDF

BACB10B216CF7 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

BACB10B216CF7: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, stud_length: 0.8440 INCHES MINIMUM AND 0.9060 INCHES MAXIMUM IN, thread_class: 3A A, stud_diameter: 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, thread_length: 0.4070 INCHES MINIMUM AND 0.4690 INCHES MAXIMUM IN, overall_length: 1.2034 INCHES MINIMUM AND 1.2654 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-048-2664, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACB10B216CF7
NSN: 3110-01-048-2664
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 3NPS1 — RBC AIRCRAFT PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
stud_length0.8440 INCHES MINIMUM AND 0.9060 INCHES MAXIMUM IN
thread_class3A A
stud_diameter0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
thread_length0.4070 INCHES MINIMUM AND 0.4690 INCHES MAXIMUM IN
overall_length1.2034 INCHES MINIMUM AND 1.2654 INCHES MAXIMUM IN
outer_ring_width0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
special_featuresNAS516-1 LUBRICATOR FITTING IN FLANGED END,COTTER PIN HOLE IN STUD END
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
surface_treatmentCADMIUM EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED
nominal_thread_size0.375 INCHES IN
NSN3110-01-048-2664
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: BACB10B216CF7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE
•
THREAD LENGTH: 0.4070 INCHES MINIMUM AND 0.4690 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RACE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED
THREAD LENGTH0.4070 INCHES MINIMUM AND 0.4690 INCHES MAXIMUM IN
STYLE DESIGNATORCAM FOLLOWER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OR MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE ROLLER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE STUD
OVERALL LENGTH1.2034 INCHES MINIMUM AND 1.2654 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.7490 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
CF-2000Reference document
Same NSN cross-reference
Reference document — Secondary reference
CB36015Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACB10B216CF7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACB10B216CF7?
BACB10B216CF7 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace BACB10B216CF7?
There are 2 known substitutes for BACB10B216CF7: CF-2000, CB36015. Substitute compatibility should be verified for your specific system.
What is the NSN for BACB10B216CF7?
BACB10B216CF7 is cataloged in the U.S. Government catalog under NSN 3110-01-048-2664. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACB10B216CF7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.