PartsTable
Technical Data Sheet
Download PDF

BACB10AF5F10H — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

BACB10AF5F10H: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include stud_length: 1.2250 INCHES MINIMUM AND 1.3070 INCHES MAXIMUM IN, thread_class: 2A A, stud_diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, thread_length: 0.4060 INCHES MINIMUM AND 0.4680 INCHES MAXIMUM IN, overall_length: 1.5640 INCHES MINIMUM AND 1.6510 INCHES MAXIMUM IN, outer_ring_width: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-036-8762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BACB10AF5F10H
NSN: 3110-01-036-8762
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1090 OR STEEL COMP 1095 END PLATE
stud_length1.2250 INCHES MINIMUM AND 1.3070 INCHES MAXIMUM IN
thread_class2A A
stud_diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
thread_length0.4060 INCHES MINIMUM AND 0.4680 INCHES MAXIMUM IN
overall_length1.5640 INCHES MINIMUM AND 1.6510 INCHES MAXIMUM IN
outer_ring_width0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
special_featuresNAS516 LUBRICATOR IN ROLLER END,COTTER PIN HOLE 0.076 IN. DIA LOCATED 0.109 IN. FROM END OF STUD IN
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
surface_treatmentCADMIUM STUD
nominal_thread_size0.312 INCHES IN
NSN3110-01-036-8762
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: BACB10AF5F10H · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
•
THREAD LENGTH: 0.4060 INCHES MINIMUM AND 0.4680 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE STUD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE
THREAD LENGTH0.4060 INCHES MINIMUM AND 0.4680 INCHES MAXIMUM IN
STYLE DESIGNATORCAM FOLLOWER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-7420 MIL SPEC 2ND MATERIAL RESPONSE ROLLER
OVERALL LENGTH1.5640 INCHES MINIMUM AND 1.6510 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
HRS-3C-F10Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACB30AF5F10HReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy BACB10AF5F10H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BACB10AF5F10H?
BACB10AF5F10H is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace BACB10AF5F10H?
There are 2 known substitutes for BACB10AF5F10H: HRS-3C-F10, BACB30AF5F10H. Substitute compatibility should be verified for your specific system.
What is the NSN for BACB10AF5F10H?
BACB10AF5F10H is cataloged in the U.S. Government catalog under NSN 3110-01-036-8762. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BACB10AF5F10H

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.