PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BA6489
BA6489 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OR RUBBER FLUOROSILICONE CLASS FQ OVERALL, special_features: 2 BOLT HOLES .205 IN. DIA.

AND 6 BOLT HOLES .325 IN. DIA. IN, aperture_diameter: 2.860 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, bolt_circle_diameter: 3.812 INCHES NOMINAL IN, elongation_percentage: 125 MAXIMUM.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-043-5833, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BA6489
NSN: 5330-01-043-5833
FSC: 5330
CAGE: SW461 — HUTCHINSON SEAL DE MEXICO STILLMAN SEAL DIVISION DIV STILLMAN SEAL,JPR,ESPA (MEX)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OR RUBBER FLUOROSILICONE CLASS FQ OVERALL
special_features2 BOLT HOLES .205 IN. DIA. AND 6 BOLT HOLES .325 IN. DIA. IN
aperture_diameter2.860 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
bolt_hole_quantity8
bolt_circle_diameter3.812 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
material_document_and_classificationQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5330-01-043-5833
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BA6489 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 2.860 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 6061 OR RUBBER FLUOROSILICONE CLASS FQ OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
BOLT CIRCLE DIAMETER: 3.812 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 8
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER2.860 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALALUMINUM ALLOY 6061 OR RUBBER FLUOROSILICONE CLASS FQ OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
BOLT CIRCLE DIAMETER3.812 INCHES NOMINAL IN
SPECIAL FEATURES2 BOLT HOLES .205 IN. DIA. AND 6 BOLT HOLES .325 IN. DIA. IN
BOLT HOLE QUANTITY8
ELONGATION PERCENTAGE125 MAXIMUM
SURFACE TREATMENTANODIZE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
40534Interchangeable
interchangeable cross-reference
interchangeable
ASME B94.19Interchangeable
interchangeable cross-reference
interchangeable
1561-0625Interchangeable
interchangeable cross-reference
interchangeable
53410Interchangeable
interchangeable cross-reference
interchangeable
40533Interchangeable
interchangeable cross-reference
interchangeable
40533CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BA6489?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BA6489?
BA6489 is a GASKET.
What parts can replace BA6489?
There are 20 known substitutes for BA6489: 40534, ASME B94.19, 1561-0625 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BA6489?
BA6489 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-043-5833. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BA6489

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026