PartsTable
Technical Data Sheet
Download PDF

BA64208 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BA64208: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.215 INCHES MINIMUM AND 0.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.845 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN, aperture_diameter: 2.015 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN, bolt_circle_diameter: 2.375 INCHES NOMINAL IN, outside_corner_radius: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, cross-sectional_thickness: 0.010 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-114-0540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BA64208
NSN: 5330-00-114-0540
FSC: 5330 — Packing and Gasket Materials
CAGE: K0680 — ROLLS-ROYCE AIRLINES (GBR)
SPECIFICATIONS
hole_diameter0.215 INCHES MINIMUM AND 0.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.845 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN
aperture_diameter2.015 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
bolt_circle_diameter2.375 INCHES NOMINAL IN
outside_corner_radius0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
cross-sectional_thickness0.010 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_bolt_circle2.385 INCHES NOMINAL IN
NSN5330-00-114-0540
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BA64208 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
•
SIDE RADIUS FROM BOLT CIRCLE: 2.385 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 2.015 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
•
BOLT CIRCLE DIAMETER: 2.375 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.215 INCHES MINIMUM AND 0.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.010 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
SIDE RADIUS FROM BOLT CIRCLE2.385 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.845 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN
APERTURE DIAMETER2.015 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
BOLT CIRCLE DIAMETER2.375 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HOLE DIAMETER0.215 INCHES MINIMUM AND 0.228 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BA64208?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BA64208?
BA64208 is a GASKET.
What is the NSN for BA64208?
BA64208 is cataloged in the U.S. Government catalog under NSN 5330-00-114-0540. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BA64208

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.