PartsTable
Technical Data Sheet
Download PDF

BA214 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BA214: BOOT,DUST AND MOISTURE SEAL.

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: ELASTOMER POLYCHLOROPRENE BODY, overall_width: 5.000 INCHES NOMINAL IN, overall_height: 3.000 INCHES NOMINAL IN, special_features: HOLE FOR 2 INCH IMC CONDUIT IN, style_designator: THRU-HOLE, body_outside_diameter: 2.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-383-4413, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BA214
NSN: 5340-01-383-4413
FSC: 5340 — Hardware, Commercial
CAGE: 29189 — MICROFLECT CO. INC. DBA VALMONT/MICROFLECT (USA)
SPECIFICATIONS
materialELASTOMER POLYCHLOROPRENE BODY
overall_width5.000 INCHES NOMINAL IN
overall_height3.000 INCHES NOMINAL IN
special_featuresHOLE FOR 2 INCH IMC CONDUIT IN
style_designatorTHRU-HOLE
body_outside_diameter2.375 INCHES NOMINAL IN
end_item_identificationNEXRAD(WSR-88D)
NSN5340-01-383-4413
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BA214 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 2.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: THRU-HOLE
•
MATERIAL: ELASTOMER POLYCHLOROPRENE BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT3.000 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER2.375 INCHES NOMINAL IN
STYLE DESIGNATORTHRU-HOLE
OVERALL WIDTH5.000 INCHES NOMINAL IN
SPECIAL FEATURESHOLE FOR 2 INCH IMC CONDUIT IN
END ITEM IDENTIFICATIONNEXRAD(WSR-88D)
MATERIALELASTOMER POLYCHLOROPRENE BODY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
1217073-203Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
B1302AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy BA214?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BA214?
BA214 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace BA214?
There are 2 known substitutes for BA214: 1217073-203, B1302A. Substitute compatibility should be verified for your specific system.
What is the NSN for BA214?
BA214 is cataloged in the U.S. Government catalog under NSN 5340-01-383-4413. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BA214