PartsTable
Technical Data Sheet
Download PDF

BA20357-1 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

BA20357-1: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 1.094 INCHES NOMINAL IN, end_radius: 0.094 INCHES NOMINAL IN, style_designator: PROJECTION ONE END LEFT INTERNAL THREAD, width_across_flats: 0.312 INCHES NOMINAL IN, cross-sectional_shape: HEXAGON. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-319-2270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BA20357-1
NSN: 5340-00-319-2270
FSC: 5340 — Hardware, Commercial
CAGE: 3B4M0 — LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS (USA)
SPECIFICATIONS
length1.094 INCHES NOMINAL IN
end_radius0.094 INCHES NOMINAL IN
style_designatorPROJECTION ONE END LEFT INTERNAL THREAD
width_across_flats0.312 INCHES NOMINAL IN
cross-sectional_shapeHEXAGON
NSN5340-00-319-2270
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BA20357-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
LENGTH: 1.094 INCHES NOMINAL IN
•
END RADIUS: 0.094 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PROJECTION ONE END LEFT INTERNAL THREAD
•
CROSS-SECTIONAL SHAPE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
LENGTH1.094 INCHES NOMINAL IN
END RADIUS0.094 INCHES NOMINAL IN
STYLE DESIGNATORPROJECTION ONE END LEFT INTERNAL THREAD
CROSS-SECTIONAL SHAPEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 3
BA20357ISSUE4DETN16-S801676-0157Reference document
Same NSN cross-reference
Reference document — Secondary reference
BL20357-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
BA20357-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy BA20357-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BA20357-1?
BA20357-1 is a STANDOFF,THREADED,SPACING.
What parts can replace BA20357-1?
There are 3 known substitutes for BA20357-1: BA20357ISSUE4DETN16-S801676-0157, BL20357-1, BA20357-2. Substitute compatibility should be verified for your specific system.
What is the NSN for BA20357-1?
BA20357-1 is cataloged in the U.S. Government catalog under NSN 5340-00-319-2270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BA20357-1