Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hole_diameter: 0.266 INCHES MINIMUM AND 0.281 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.370 INCHES NOMINAL IN, overall_length: 2.370 INCHES NOMINAL IN, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-474-1002, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
BA1565
NSN:5330-00-474-1002 FSC:5330 CAGE:SW461 — HUTCHINSON SEAL DE MEXICO STILLMAN SEAL DIVISION DIV STILLMAN SEAL,JPR,ESPA (MEX)
SPECIFICATIONS
material
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hole_diameter
0.266 INCHES MINIMUM AND 0.281 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
2.370 INCHES NOMINAL IN
overall_length
2.370 INCHES NOMINAL IN
hardness_rating
55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designator
NON-CIRCULAR
aperture_diameter
1.520 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
surface_treatment
ANODIZE OVERALL
bolt_hole_quantity
4
fsc_application_data
FUEL SYSTEM INSTL,AIR FRAME
outside_corner_radius
0.280 INCHES NOMINAL IN
cross-sectional_thickness
0.090 INCHES NOMINAL IN
NSN
5330-00-474-1002
COMPONENT DIAGRAM
KEY FEATURES
•
FSC APPLICATION DATA: FUEL SYSTEM INSTL,AIR FRAME
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 1.520 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
OUTSIDE CORNER RADIUS: 0.280 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.280 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FSC APPLICATION DATA
FUEL SYSTEM INSTL,AIR FRAME
STYLE DESIGNATOR
NON-CIRCULAR
APERTURE DIAMETER
1.520 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
SURFACE TREATMENT
ANODIZE OVERALL
OUTSIDE CORNER RADIUS
0.280 INCHES NOMINAL IN
OVERALL WIDTH
2.370 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
1.812 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH