PartsTable
Technical Data Sheet
PartsTable / COMPONENT / BA1191-2PC13D
BA1191-2PC13D ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, outside_diameter: 1.0000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.766 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-810-2354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
BA1191-2PC13D
NSN: 5330-00-810-2354
FSC: 5330
CAGE: 63097 — VIKING PUMP, INC (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
outside_diameter1.0000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.766 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-F-10336 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-810-2354
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: BA1191-2PC13D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-10336 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: CELLULOSE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 0.766 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.0000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-F-10336 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCELLULOSE OVERALL
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER0.766 INCHES NOMINAL IN
OUTSIDE DIAMETER1.0000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
BL71Interchangeable
interchangeable cross-reference
interchangeable
H70-6Interchangeable
interchangeable cross-reference
interchangeable
H-7206Interchangeable
interchangeable cross-reference
interchangeable
S23-038-1Y-324Interchangeable
interchangeable cross-reference
interchangeable
8U56122-458Interchangeable
interchangeable cross-reference
interchangeable
BA1191PC14Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy BA1191-2PC13D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BA1191-2PC13D?
BA1191-2PC13D is a GASKET.
What parts can replace BA1191-2PC13D?
There are 7 known substitutes for BA1191-2PC13D: BL71, H70-6, H-7206 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for BA1191-2PC13D?
BA1191-2PC13D is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-810-2354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BA1191-2PC13D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026