PartsTable
Technical Data Sheet
Download PDF

BA-10034-559 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

BA-10034-559: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include shaft_style: ROUND, SLOTTED, shaft_length: 0.625 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, shaft_diameter: 0.250 INCHES NOMINAL IN, mounting_method: LOCKING BUSHING, device_design_type: ERR-030 AT 3:00 OCLOCKUNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-284-3419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ BA-10034-559
NSN: 5905-00-284-3419
FSC: 5905 — Resistor
CAGE: 12697 — CLAROSTAT SENSORS AND CONTROLS (USA)
SPECIFICATIONS
shaft_styleROUND, SLOTTED
shaft_length0.625 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodLOCKING BUSHING
section_quantity1
device_design_typeERR-030 AT 3:00 OCLOCKUNABLE TO DECODE
shaft_bearing_typeBEARING
nonturn_device_radius0.531 INCHES NOMINAL IN
screw_thread_diameter0.375 INCHES NOMINAL IN
mounting_bushing_length0.500 INCHES NOMINAL IN
terminal_type_and_quantity3 TAB, SOLDER LUG
NSN5905-00-284-3419
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN BA-10034-559 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 1.000 OHMS SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.250 INCHES NOMINAL IN
•
SHAFT BEARING TYPE: BEARING
•
NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL IN
•
MOUNTING METHOD: LOCKING BUSHING
•
SHAFT STYLE: ROUND, SLOTTED
TECHNICAL CHARACTERISTICS
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION1.000 OHMS SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES NOMINAL IN
SHAFT BEARING TYPEBEARING
NONTURN DEVICE RADIUS0.531 INCHES NOMINAL IN
MOUNTING METHODLOCKING BUSHING
SHAFT STYLEROUND, SLOTTED
ACTUATOR TYPESINGLE SHAFT
SHAFT LENGTH0.625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
252LTReference document
Same NSN cross-reference
Reference document — Secondary reference
S40-5089Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy BA-10034-559?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is BA-10034-559?
BA-10034-559 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace BA-10034-559?
There are 2 known substitutes for BA-10034-559: 252LT, S40-5089. Substitute compatibility should be verified for your specific system.
What is the NSN for BA-10034-559?
BA-10034-559 is cataloged in the U.S. Government catalog under NSN 5905-00-284-3419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — BA-10034-559