PartsTable
Technical Data Sheet
PartsTable / MRO / B98
B98 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN, shaft_style: ROUND, FLUTED, switch_type: ROTARY, shaft_length: 3.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ B98
NSN: 3110-00-227-2313
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
shaft_styleROUND, FLUTED
switch_typeROTARY
shaft_length3.375 INCHES NOMINAL IN
thread_class2B
actuator_typeSINGLE SHAFT
bore_diameter0.5625 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
alignment_typeRIGID
NSN3110-00-227-2313
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B98 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.5625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.7500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.5625 INCHES NOMINAL IN
OVERALL WIDTH0.5000 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
10082592Interchangeable
interchangeable cross-reference
interchangeable
1690Interchangeable
interchangeable cross-reference
interchangeable
Y00015057Interchangeable
interchangeable cross-reference
interchangeable
B98Interchangeable
interchangeable cross-reference
interchangeable
61961Interchangeable
interchangeable cross-reference
interchangeable
A71628Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B98?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B98?
B98 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace B98?
There are 6 known substitutes for B98: 10082592, 1690, Y00015057 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B98?
B98 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B98

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026