PartsTable
Technical Data Sheet
PartsTable / COMPONENT / B9216
B9216 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL BAND, bore_diameter: 4.0000 INCHES MINIMUM AND 4.0010 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 1.7970 INCHES MINIMUM AND 1.8270 INCHES MAXIMUM IN, surface_finish: UNGROUND, special_features: W.0 OIL HOLE IN BAND ALSO RADIUS AT BORE CHAMFER 1/16 IN. BY 45 DEG IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-195-1052, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B9216
NSN: 3110-00-195-1052
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL BAND
bore_diameter4.0000 INCHES MINIMUM AND 4.0010 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height1.7970 INCHES MINIMUM AND 1.8270 INCHES MAXIMUM IN
surface_finishUNGROUND
special_featuresW.0 OIL HOLE IN BAND ALSO RADIUS AT BORE CHAMFER 1/16 IN. BY 45 DEG IN
style_designatorTAPERED ROLLERS, BANDED OD
overall_outside_diameter7.6250 INCHES MINIMUM AND 7.6300 INCHES MAXIMUM IN
thrust_directional_capability_designationSINGLE
NSN3110-00-195-1052
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B9216 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: UNGROUND
•
MATERIAL: STEEL WASHER
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
BORE DIAMETER: 4.0000 INCHES MINIMUM AND 4.0010 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 7.6250 INCHES MINIMUM AND 7.6300 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESW.0 OIL HOLE IN BAND ALSO RADIUS AT BORE CHAMFER 1/16 IN. BY 45 DEG IN
ALIGNMENT TYPERIGID
SURFACE FINISHUNGROUND
MATERIALSTEEL WASHER
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
BORE DIAMETER4.0000 INCHES MINIMUM AND 4.0010 INCHES MAXIMUM IN
MATERIALSTEEL BAND
OVERALL OUTSIDE DIAMETER7.6250 INCHES MINIMUM AND 7.6300 INCHES MAXIMUM IN
OVERALL HEIGHT1.7970 INCHES MINIMUM AND 1.8270 INCHES MAXIMUM IN
STYLE DESIGNATORTAPERED ROLLERS, BANDED OD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
2098-5273-54Interchangeable
interchangeable cross-reference
interchangeable
1055468-1Interchangeable
interchangeable cross-reference
interchangeable
T-400Interchangeable
interchangeable cross-reference
interchangeable
10086390Interchangeable
interchangeable cross-reference
interchangeable
5180-00-333-3266Interchangeable
interchangeable cross-reference
interchangeable
2530BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B9216?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B9216?
B9216 is a BEARING,ROLLER,THRUST.
What parts can replace B9216?
There are 10 known substitutes for B9216: 2098-5273-54, 1055468-1, T-400 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B9216?
B9216 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-195-1052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B9216

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026