PartsTable
Technical Data Sheet
PartsTable / COMPONENT / B9006
B9006 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: RADIUS, pin_overall_length: 1.000 INCHES NOMINAL IN, pin_overall_diameter: 0.2500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-058-9923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B9006
NSN: 5315-00-058-9923
FSC: 5315
CAGE: 82983 — AMF INC AMF YORK DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
hardness_rating25.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleRADIUS
pin_overall_length1.000 INCHES NOMINAL IN
pin_overall_diameter0.2500 INCHES NOMINAL IN
first_end_taper_angle10.0 DEGREES NOMINAL
second_end_corner_radius0.083 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-058-9923
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: B9006 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END CORNER RADIUS: 0.083 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
MATERIAL: STEEL OVERALL
•
SECOND END STYLE: RADIUS
•
PIN OVERALL DIAMETER: 0.2500 INCHES NOMINAL IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER ANGLE: 10.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END CORNER RADIUS0.083 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
MATERIALSTEEL OVERALL
SECOND END STYLERADIUS
PIN OVERALL DIAMETER0.2500 INCHES NOMINAL IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER ANGLE10.0 DEGREES NOMINAL
PIN OVERALL LENGTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
921726Interchangeable
interchangeable cross-reference
interchangeable
921726 ITEM A04Interchangeable
interchangeable cross-reference
interchangeable
9006Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B9006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B9006?
B9006 is a PIN,STRAIGHT,HEADLESS.
What parts can replace B9006?
There are 3 known substitutes for B9006: 921726, 921726 ITEM A04, 9006. Substitute compatibility should be verified for your specific system.
What is the NSN for B9006?
B9006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-058-9923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B9006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026