PartsTable
Technical Data Sheet
Download PDF

B86001-32DL — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B86001-32DL: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY D712.0 OUTER RING, hole_diameter: 0.323 INCHES MINIMUM AND 0.338 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.998 INCHES NOMINAL IN, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL INNER RING, style_designator: NON-CIRCULAR, aperture_diameter: 2.406 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-341-7531, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B86001-32DL
NSN: 5330-01-341-7531
FSC: 5330 — Packing and Gasket Materials
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY D712.0 OUTER RING
hole_diameter0.323 INCHES MINIMUM AND 0.338 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.998 INCHES NOMINAL IN
hardness_rating60.0 SHORE DUROMETER A NOMINAL INNER RING
style_designatorNON-CIRCULAR
aperture_diameter2.406 INCHES NOMINAL IN
bolt_hole_quantity4
gage_ring_thickness0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
bolt_circle_diameter3.353 INCHES MINIMUM AND 3.363 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.320 INCHES NOMINAL IN
cross-sectional_thickness0.120 INCHES NOMINAL IN
NSN5330-01-341-7531
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B86001-32DL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES NOMINAL IN
•
GAGE RING THICKNESS: 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL INNER RING
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988,CL1,GR60 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.120 INCHES NOMINAL IN
GAGE RING THICKNESS0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL INNER RING
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25988,CL1,GR60 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE OUTER RING
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH3.998 INCHES NOMINAL IN
APERTURE DIAMETER2.406 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
C-A10802-32DLSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
868122-32DLSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B86001-32DL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B86001-32DL?
B86001-32DL is a GASKET.
What parts can replace B86001-32DL?
There are 2 known substitutes for B86001-32DL: C-A10802-32DL, 868122-32DL. Substitute compatibility should be verified for your specific system.
What is the NSN for B86001-32DL?
B86001-32DL is cataloged in the U.S. Government catalog under NSN 5330-01-341-7531. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B86001-32DL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.