PartsTable
Technical Data Sheet
Download PDF

B86001-32CL — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B86001-32CL: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 RETAINER, construction: ONE-PIECE, outside_diameter: 3.998 INCHES NOMINAL IN, retainer_thickness: 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN, packing_ring_thickness: 0.120 INCHES NOMINAL IN, packing_inside_diameter: 1.841 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-348-8530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B86001-32CL
NSN: 5330-01-348-8530
FSC: 5330 — Packing and Gasket Materials
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 RETAINER
constructionONE-PIECE
outside_diameter3.998 INCHES NOMINAL IN
retainer_thickness0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
packing_ring_thickness0.120 INCHES NOMINAL IN
packing_inside_diameter1.841 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
NSN5330-01-348-8530
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B86001-32CL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING RING THICKNESS: 0.120 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 1.841 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.998 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
•
RETAINER THICKNESS: 0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 RETAINER
TECHNICAL CHARACTERISTICS
PACKING RING THICKNESS0.120 INCHES NOMINAL IN
PACKING INSIDE DIAMETER1.841 INCHES NOMINAL IN
OUTSIDE DIAMETER3.998 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25988,CL1,GR60 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
RETAINER THICKNESS0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302 RETAINER
MATERIALRUBBER FLUOROSILICONE CLASS FQ PACKING
CONSTRUCTIONONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
07A219-32CLSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C-A10802-32CLSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy B86001-32CL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B86001-32CL?
B86001-32CL is a PACKING WITH RETAINER.
What parts can replace B86001-32CL?
There are 2 known substitutes for B86001-32CL: 07A219-32CL, C-A10802-32CL. Substitute compatibility should be verified for your specific system.
What is the NSN for B86001-32CL?
B86001-32CL is cataloged in the U.S. Government catalog under NSN 5330-01-348-8530. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B86001-32CL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.