PartsTable
Technical Data Sheet
Download PDF

B72001-270-2 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B72001-270-2: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, construction: SOLID, end_cut_angle: 45.0 DEGREES, end_cut_length: 0.125 INCHES NOMINAL IN, overall_length: 16.000 INCHES NOMINAL IN, style_designator: STRIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-918-9581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B72001-270-2
NSN: 5330-00-918-9581
FSC: 5330 — Packing and Gasket Materials
CAGE: 27965 — PARISI ASSOCIATES LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
constructionSOLID
end_cut_angle45.0 DEGREES
end_cut_length0.125 INCHES NOMINAL IN
overall_length16.000 INCHES NOMINAL IN
style_designatorSTRIP
attachment_methodROUND HOLE
fabrication_methodSOLID
cross-sectional_width0.250 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
attachment_hole_diameter0.250 INCHES NOMINAL IN
attachment_feature_quantity5
NSN5330-00-918-9581
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B72001-270-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
ATTACHMENT FEATURE QUANTITY: 5
•
END CUT LENGTH: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
ATTACHMENT HOLE DIAMETER0.250 INCHES NOMINAL IN
ATTACHMENT FEATURE QUANTITY5
END CUT LENGTH0.125 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH16.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
ATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG LENGTH3.875 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy B72001-270-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B72001-270-2?
B72001-270-2 is a SEAL,NONMETALLIC STRIP.
What is the NSN for B72001-270-2?
B72001-270-2 is cataloged in the U.S. Government catalog under NSN 5330-00-918-9581. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B72001-270-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.