PartsTable
Technical Data Sheet
PartsTable / MRO / B7-10
B7-10 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include length: 8.000 FEET NOMINAL FT, material: LUBRICANT LUBRICATION, pole_type: UPRIGHT, construction: JOINTED, corner_shape: SQUARE OUTSIDE LEFT CORNER, flange_width: 0.0450 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-500-9342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ B7-10
NSN: 5999-00-500-9342
FSC: 5999
CAGE: 56365 — SCHNEIDER ELECTRIC USA, INC. (USA)
SPECIFICATIONS
length8.000 FEET NOMINAL FT
materialLUBRICANT LUBRICATION
pole_typeUPRIGHT
constructionJOINTED
corner_shapeSQUARE OUTSIDE LEFT CORNER
flange_width0.0450 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM IN
base_diameter1.000 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
bore_diameter0.4375 INCHES NOMINAL IN
overall_width0.6250 INCHES NOMINAL IN
alignment_typeRIGID
overall_height0.969 INCHES NOMINAL IN
overall_length0.3700 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
NSN5999-00-500-9342
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN B7-10 MFR BEARING,ROLLER,NEEDLE
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 2 UNTHREADED HOLE(S)
•
MOUNTING HOLE DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE(S)
OVERALL LENGTH1.875 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
OVERALL HEIGHT0.969 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.188 INCHES NOMINAL IN
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE(S)
OVERALL LENGTH1.875 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
OVERALL HEIGHT0.969 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
VIB71Upgraded Successor
successor cross-reference
successor
B71Upgraded Successor
successor cross-reference
successor
B7-10Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-40048Interchangeable
interchangeable cross-reference
interchangeable
C410-25Interchangeable
interchangeable cross-reference
interchangeable
1212FNInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy B7-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B7-10?
B7-10 is a BEARING,ROLLER,NEEDLE. It is classified as a MRO (MRO_GENERAL).
What parts can replace B7-10?
There are 11 known substitutes for B7-10: VIB71, B71, B7-10 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B7-10?
B7-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-500-9342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B7-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026