PartsTable
Technical Data Sheet
PartsTable / O-RING / B63115-139
B63115-139 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.381 INCHES NOMINAL IN, center_hole_diameter: 2.158 INCHES MINIMUM AND 2.192 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-099-7533, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B63115-139
NSN: 5331-00-099-7533
FSC: 5331 — O-RING
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter2.381 INCHES NOMINAL IN
center_hole_diameter2.158 INCHES MINIMUM AND 2.192 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-099-7533
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B63115-139 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 2.158 INCHES MINIMUM AND 2.192 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.381 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER2.158 INCHES MINIMUM AND 2.192 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.381 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
MILR25988ESInterchangeable
interchangeable cross-reference
interchangeable
PRP111-11646Interchangeable
interchangeable cross-reference
interchangeable
H733-4-111Interchangeable
interchangeable cross-reference
interchangeable
M25988/1-025Interchangeable
interchangeable cross-reference
interchangeable
10163359Interchangeable
interchangeable cross-reference
interchangeable
754-4-37002-025Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy B63115-139?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B63115-139?
B63115-139 is a O-RING.
What parts can replace B63115-139?
There are 32 known substitutes for B63115-139: MILR25988ES, PRP111-11646, H733-4-111 and 29 more. Substitute compatibility should be verified for your specific system.
Is B63115-139 still available?
B63115-139 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B63115-139

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026