PartsTable
Technical Data Sheet
Download PDF

B6102 — ARM,STEERING GEAR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

B6102: ARM,STEERING GEAR.

The ARM,STEERING GEAR is a the manufacturer industrial component. Key specifications include width: 1.063 INCHES NOMINAL IN, diameter: 1.230 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, design_type: OFFSET, taper_length: 1.031 INCHES NOMINAL IN, teeth_quantity: 32, counterbore_feature: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 2530-00-737-3789, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B6102
NSN: 2530-00-737-3789
FSC: 2530 — Vehicular Brake, Steering, Axle, Wheel, and Track Components
CAGE: 73740 — TRW INC TRW COMMERCIAL STEERING DIV (USA)
SPECIFICATIONS
width1.063 INCHES NOMINAL IN
diameter1.230 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
design_typeOFFSET
taper_length1.031 INCHES NOMINAL IN
teeth_quantity32
counterbore_featureNOT INCLUDED
small_end_teeth_depth0.043 INCHES NOMINAL IN
teeth_cut_angle_in_deg1 DEG 37 MIN 39 SEC
small_end_major_diameter1.185 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN
drag_link_end_characteristicW/INTEGRAL BALL
serration_included_angle_in_deg90.0
sector_shaft_mounting_end_overall_width2.125 INCHES NOMINAL IN
NSN2530-00-737-3789
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available ARM,STEERING GEAR TITLE COMPONENT PN B6102 MFR ARM,STEERING GEAR
KEY FEATURES
•
DRAG LINK END CHARACTERISTIC: W/INTEGRAL BALL
•
SECTOR SHAFT MOUNTING END OVERALL THICKNESS: 1.031 INCHES NOMINAL IN
•
TEETH QUANTITY: 32
•
SECTOR SHAFT MOUNTING END OVERALL WIDTH: 2.125 INCHES NOMINAL IN
•
DESIGN TYPE: OFFSET
•
SERRATION INCLUDED ANGLE IN DEG: 90.0
•
SECTOR SHAFT MOUNTING END SERRATED BORE: INCLUDED
•
DIAMETER: 1.230 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
DRAG LINK END CHARACTERISTICW/INTEGRAL BALL
SECTOR SHAFT MOUNTING END OVERALL THICKNESS1.031 INCHES NOMINAL IN
TEETH QUANTITY32
SECTOR SHAFT MOUNTING END OVERALL WIDTH2.125 INCHES NOMINAL IN
DESIGN TYPEOFFSET
SERRATION INCLUDED ANGLE IN DEG90.0
SECTOR SHAFT MOUNTING END SERRATED BOREINCLUDED
DIAMETER1.230 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
SMALL END MAJOR DIAMETER1.185 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN
TEETH CUT ANGLE IN DEG1 DEG 37 MIN 39 SEC
OTHER ITEMS IN FSC 2530 — Vehicular Brake, Steering, Axle, Wheel, and Track Components
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
2530-00-003-5229 2530-00-139-4058 2530-00-363-4183 2530-00-478-5792 2530-00-496-2927 2530-00-701-0656 2530-00-734-2546 2530-01-171-5122
SUBSTITUTES & CROSS-REFERENCES 3
1270127Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
E18868Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7373789Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy B6102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B6102?
B6102 is a ARM,STEERING GEAR.
What parts can replace B6102?
There are 3 known substitutes for B6102: 1270127, E18868, 7373789. Substitute compatibility should be verified for your specific system.
What is the NSN for B6102?
B6102 is cataloged in the U.S. Government catalog under NSN 2530-00-737-3789. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B6102