PartsTable
Technical Data Sheet
Download PDF

B51044 — VALVE,CHECK

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

B51044: VALVE,CHECK.

The VALVE,CHECK is a the manufacturer industrial component. Key specifications include flange_shape: ROUND WITH HOLES FIRST END, connection_type: UNTHREADED INTERNAL PIPE SECOND END, style_designator: STRAIGHT THRU, mounting_position: HORIZONTAL, bolt_hole_quantity: 4 FIRST END, flange_face_design: RAISED STRAIGHT FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4820-00-287-5144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B51044
NSN: 4820-00-287-5144
FSC: 4820 — Valves, Nonpowered
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
flange_shapeROUND WITH HOLES FIRST END
connection_typeUNTHREADED INTERNAL PIPE SECOND END
style_designatorSTRAIGHT THRU
mounting_positionHORIZONTAL
bolt_hole_quantity4 FIRST END
flange_face_designRAISED STRAIGHT FIRST END
operating_pressure375.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
disk_loading_methodSPRING
flow_control_deviceDISK
nominal_outside_diameter2.625 INCHES FIRST END IN
bolt_hole_nominal_diameter0.375 INCHES FIRST END IN
bolt_circle_nominal_diameter2.000 INCHES FIRST END IN
NSN4820-00-287-5144
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: B51044 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
FLANGE SHAPE: ROUND WITH HOLES FIRST END
•
NOMINAL PIPE SIZE ACCOMMODATED: 0.375 INCHES SECOND END IN
•
FLANGE FACE DESIGN: RAISED STRAIGHT FIRST END
•
BOLT CIRCLE NOMINAL DIAMETER: 2.000 INCHES FIRST END IN
•
MOUNTING POSITION: HORIZONTAL
•
CONNECTION TYPE: UNTHREADED INTERNAL PIPE SECOND END
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
FLANGE SHAPEROUND WITH HOLES FIRST END
NOMINAL PIPE SIZE ACCOMMODATED0.375 INCHES SECOND END IN
FLANGE FACE DESIGNRAISED STRAIGHT FIRST END
BOLT CIRCLE NOMINAL DIAMETER2.000 INCHES FIRST END IN
MOUNTING POSITIONHORIZONTAL
CONNECTION TYPEUNTHREADED INTERNAL PIPE SECOND END
CONNECTION TYPEFLANGE FIRST END
STYLE DESIGNATORSTRAIGHT THRU
BOLT HOLE NOMINAL DIAMETER0.375 INCHES FIRST END IN
OTHER ITEMS IN FSC 4820 — Valves, Nonpowered
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4820-00-000-0097 4820-00-001-0010 4820-00-001-0020 4820-00-001-0021 4820-00-001-0032 4820-00-001-0037 4820-00-001-0042 4820-00-001-1230
SUBSTITUTES & CROSS-REFERENCES 2
H45CRA66401Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B-51044MODReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B51044?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B51044?
B51044 is a VALVE,CHECK.
What parts can replace B51044?
There are 2 known substitutes for B51044: H45CRA66401, B-51044MOD. Substitute compatibility should be verified for your specific system.
What is the NSN for B51044?
B51044 is cataloged in the U.S. Government catalog under NSN 4820-00-287-5144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B51044