PartsTable
Technical Data Sheet
Download PDF

B5-6-SS — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

B5-6-SS: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include alignment_type: RIGIDRIGID, overall_height: 0.2490 INCHES NOMINAL0.2490 INCHES NOMINAL IN, surface_finish: GROUNDGROUND, style_designator: FLAT RACE SURFACE, IN LINE BALL RETAINERFLAT RACE SURFACE, IN LINE BALL RETAINER, largest_bore_diameter: 0.5030 INCHES MINIMUM AND 0.5030 INCHES MINIMUM AND 0.5110 INCHES MAXIMUM0.5110 INCHES MAXIMUM IN, bore_smallest_diameter: 0.5030 INCHES MINIMUM AND 0.5030 INCHES MINIMUM AND 0.5110 INCHES MAXIMUM0.5110 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-368-3762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B5-6-SS
NSN: 3110-01-368-3762
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 29440 — W. M. BERG, INC. (USA)
SPECIFICATIONS
alignment_typeRIGIDRIGID
overall_height0.2490 INCHES NOMINAL0.2490 INCHES NOMINAL IN
surface_finishGROUNDGROUND
style_designatorFLAT RACE SURFACE, IN LINE BALL RETAINERFLAT RACE SURFACE, IN LINE BALL RETAINER
largest_bore_diameter0.5030 INCHES MINIMUM AND 0.5030 INCHES MINIMUM AND 0.5110 INCHES MAXIMUM0.5110 INCHES MAXIMUM IN
bore_smallest_diameter0.5030 INCHES MINIMUM AND 0.5030 INCHES MINIMUM AND 0.5110 INCHES MAXIMUM0.5110 INCHES MAXIMUM IN
overall_outside_diameter0.9260 INCHES MINIMUM AND 0.9260 INCHES MINIMUM AND 0.9340 INCHES MAXIMUM0.9340 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGSAFBMA STD TOLERANCE FOR THRUST BEARINGS
thrust_directional_capability_designationPLAINPLAIN
NSN3110-01-368-3762
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B5-6-SS · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
SURFACE FINISH: GROUNDGROUND
•
STYLE DESIGNATOR: FLAT RACE SURFACE, IN LINE BALL RETAINERFLAT RACE SURFACE, IN LINE BALL RETAINER
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: PLAINPLAIN
•
OVERALL OUTSIDE DIAMETER: 0.9260 INCHES MINIMUM AND 0.9260 INCHES MINIMUM AND 0.9340 INCHES MAXIMUM0.9340 INCHES MAXIMUM IN
•
BORE SMALLEST DIAMETER: 0.5030 INCHES MINIMUM AND 0.5030 INCHES MINIMUM AND 0.5110 INCHES MAXIMUM0.5110 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGIDRIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
OVERALL HEIGHT0.2490 INCHES NOMINAL0.2490 INCHES NOMINAL IN
SURFACE FINISHGROUNDGROUND
STYLE DESIGNATORFLAT RACE SURFACE, IN LINE BALL RETAINERFLAT RACE SURFACE, IN LINE BALL RETAINER
THRUST DIRECTIONAL CAPABILITY DESIGNATIONPLAINPLAIN
OVERALL OUTSIDE DIAMETER0.9260 INCHES MINIMUM AND 0.9260 INCHES MINIMUM AND 0.9340 INCHES MAXIMUM0.9340 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER0.5030 INCHES MINIMUM AND 0.5030 INCHES MINIMUM AND 0.5110 INCHES MAXIMUM0.5110 INCHES MAXIMUM IN
ALIGNMENT TYPERIGIDRIGID
LARGEST BORE DIAMETER0.5030 INCHES MINIMUM AND 0.5030 INCHES MINIMUM AND 0.5110 INCHES MAXIMUM0.5110 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGSAFBMA STD TOLERANCE FOR THRUST BEARINGS
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B5-6-SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B5-6-SS?
B5-6-SS is a BEARING,BALL,THRUST.
What is the NSN for B5-6-SS?
B5-6-SS is cataloged in the U.S. Government catalog under NSN 3110-01-368-3762. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B5-6-SS