PartsTable
Technical Data Sheet
PartsTable / COMPONENT / B4Q7118B
B4Q7118B ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.1721 INCHES NOMINAL IN, bore_diameter: 1.4375 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0312 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B4Q7118B
NSN: 3110-00-100-9554
FSC: 3110
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.1721 INCHES NOMINAL IN
bore_diameter1.4375 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0312 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-9554
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B4Q7118B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.4375 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE WIDTH: 1.1721 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.4375 INCHES NOMINAL IN
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH1.1721 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
MIRACLEWIPEL001Interchangeable
interchangeable cross-reference
interchangeable
33S009076Interchangeable
interchangeable cross-reference
interchangeable
A-A-59323 TYPE IIInterchangeable
interchangeable cross-reference
interchangeable
2924Interchangeable
interchangeable cross-reference
interchangeable
3479Interchangeable
interchangeable cross-reference
interchangeable
DP2924Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B4Q7118B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B4Q7118B?
B4Q7118B is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace B4Q7118B?
There are 20 known substitutes for B4Q7118B: MIRACLEWIPEL001, 33S009076, A-A-59323 TYPE II and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B4Q7118B?
B4Q7118B is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-9554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B4Q7118B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026