PartsTable
Technical Data Sheet
Download PDF

B434-2000-7 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B434-2000-7: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: PLASTIC ACETAL, overall_width: 4.750 INCHES NOMINAL IN, overall_height: 2.000 INCHES NOMINAL IN, overall_length: 31.500 INCHES NOMINAL IN, special_features: MATERIAL IS "DELRIN", mounting_hole_type: COUNTERSUNK. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-516-0859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B434-2000-7
NSN: 5340-01-516-0859
FSC: 5340 — Hardware, Commercial
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialPLASTIC ACETAL
overall_width4.750 INCHES NOMINAL IN
overall_height2.000 INCHES NOMINAL IN
overall_length31.500 INCHES NOMINAL IN
special_featuresMATERIAL IS "DELRIN"
mounting_hole_typeCOUNTERSUNK
mounting_hole_diameter0.100 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
mounting_hole_quantity6
end_item_identificationW/S: SEAWOLF CLASS SSN
NSN5340-01-516-0859
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B434-2000-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 6
•
MOUNTING HOLE DIAMETER: 0.100 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC ACETAL
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY6
OVERALL HEIGHT2.000 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.100 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
OVERALL LENGTH31.500 INCHES NOMINAL IN
OVERALL WIDTH4.750 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL IS "DELRIN"
END ITEM IDENTIFICATIONW/S: SEAWOLF CLASS SSN
MATERIALPLASTIC ACETAL
MOUNTING HOLE TYPECOUNTERSUNK
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
596-7409212-14Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
B434-2110-14Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
596-7409210-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B434-2000-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B434-2000-7?
B434-2000-7 is a BRACKET,MOUNTING.
What parts can replace B434-2000-7?
There are 3 known substitutes for B434-2000-7: 596-7409212-14, B434-2110-14, 596-7409210-7. Substitute compatibility should be verified for your specific system.
What is the NSN for B434-2000-7?
B434-2000-7 is cataloged in the U.S. Government catalog under NSN 5340-01-516-0859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B434-2000-7