PartsTable
Technical Data Sheet
Download PDF

B402783-22(TBD) — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B402783-22(TBD): GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 16.000 INCHES NOMINAL IN, gage_ring_thickness: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, fsc_application_data: CATAPULT,AIRCRAFT LAUNCHING, bearing_surface_width: 0.875 INCHES NOMINAL IN, maximum_pressure_rating: 600.0 POUNDS PER SQUARE INCH (PSI) LBS, cross-sectional_thickness: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-559-9400, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B402783-22(TBD)
NSN: 5330-00-559-9400
FSC: 5330 — Packing and Gasket Materials
CAGE: 58156 — FLEXITALLIC US, LLC (USA)
SPECIFICATIONS
outside_diameter16.000 INCHES NOMINAL IN
gage_ring_thickness0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
fsc_application_dataCATAPULT,AIRCRAFT LAUNCHING
bearing_surface_width0.875 INCHES NOMINAL IN
maximum_pressure_rating600.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
gage_ring_outside_diameter17.938 INCHES NOMINAL IN
NSN5330-00-559-9400
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B402783-22(TBD) MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: CATAPULT,AIRCRAFT LAUNCHING
•
CROSS-SECTIONAL THICKNESS: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
GAGE RING THICKNESS: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
MAXIMUM PRESSURE RATING: 600.0 POUNDS PER SQUARE INCH (PSI) LBS
•
BEARING SURFACE WIDTH: 0.875 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 16.000 INCHES NOMINAL IN
•
GAGE RING OUTSIDE DIAMETER: 17.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATACATAPULT,AIRCRAFT LAUNCHING
CROSS-SECTIONAL THICKNESS0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
GAGE RING THICKNESS0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
MAXIMUM PRESSURE RATING600.0 POUNDS PER SQUARE INCH (PSI) LBS
BEARING SURFACE WIDTH0.875 INCHES NOMINAL IN
OUTSIDE DIAMETER16.000 INCHES NOMINAL IN
GAGE RING OUTSIDE DIAMETER17.938 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy B402783-22(TBD)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B402783-22(TBD)?
B402783-22(TBD) is a GASKET.
What is the NSN for B402783-22(TBD)?
B402783-22(TBD) is cataloged in the U.S. Government catalog under NSN 5330-00-559-9400. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B402783-22(TBD)