PartsTable
Technical Data Sheet
Download PDF

B4016 — CONNECTING LINK,RIGID

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B4016: CONNECTING LINK,RIGID.

The CONNECTING LINK,RIGID is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.656 INCHES NOMINAL IN, aperture_width: 2.219 INCHES NOMINAL IN, overall_length: 3.188 INCHES NOMINAL IN, aperture_length: 2.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-196-5385, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B4016
NSN: 5330-00-196-5385
NIINs: 001965385, 007520407, 011934415, 013377740
FSC: 5330 — Packing and Gasket Materials
CAGE: 90005 — PUROLATOR FACET INC. DIV PARKER AEROSPACE FILTRATION DIVISION DBA PUROLATOR FACET, IN (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.656 INCHES NOMINAL IN
aperture_width2.219 INCHES NOMINAL IN
overall_length3.188 INCHES NOMINAL IN
aperture_length2.750 INCHES NOMINAL IN
peripheral_diameter1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM IN
center_hole_diameter1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
elongation_percentage164 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-196-5385
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B4016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 164 MAXIMUM
•
PERIPHERAL DIAMETER: 1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
ELONGATION PERCENTAGE164 MAXIMUM
PERIPHERAL DIAMETER1.492 INCHES MINIMUM AND 1.532 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.228 INCHES MINIMUM AND 1.240 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
25K40158Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP902-23Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-218 N304-75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AM421S4400-1022153PC45AReference document
Same NSN cross-reference
Reference document — Secondary reference
19-04-135-011Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
501232Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy B4016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B4016?
B4016 is a CONNECTING LINK,RIGID.
What parts can replace B4016?
There are 9 known substitutes for B4016: 25K40158, PRP902-23, 2-218 N304-75 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B4016?
B4016 is cataloged in the U.S. Government catalog under NSN 5330-00-196-5385. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B4016

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.