PartsTable
Technical Data Sheet
PartsTable / COMPONENT / B4-1654-24PC153
B4-1654-24PC153 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include center_hole_diameter: 3.469 INCHES MINIMUM AND 3.499 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, material_document_and_classification: MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-256-0201, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B4-1654-24PC153
NSN: 5330-00-256-0201
FSC: 5330
CAGE: 86768 — TELEDYNE INDUSTRIES INC TELEDYNE FLUID SYSTEMS REPUBLIC BUSINESS UNIT (USA)
SPECIFICATIONS
center_hole_diameter3.469 INCHES MINIMUM AND 3.499 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
material_document_and_classificationMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-256-0201
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B4-1654-24PC153 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE DIAMETER: 3.469 INCHES MINIMUM AND 3.499 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE DIAMETER3.469 INCHES MINIMUM AND 3.499 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
523418Interchangeable
interchangeable cross-reference
interchangeable
AN6230B16Interchangeable
interchangeable cross-reference
interchangeable
1376-23-226Interchangeable
interchangeable cross-reference
interchangeable
MS28775-238Interchangeable
interchangeable cross-reference
interchangeable
NG14145 ITEM 92Interchangeable
interchangeable cross-reference
interchangeable
S5901H1297870ITEM190Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy B4-1654-24PC153?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B4-1654-24PC153?
B4-1654-24PC153 is a PACKING,PREFORMED.
What parts can replace B4-1654-24PC153?
There are 14 known substitutes for B4-1654-24PC153: 523418, AN6230B16, 1376-23-226 and 11 more. Substitute compatibility should be verified for your specific system.
Is B4-1654-24PC153 still available?
B4-1654-24PC153 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B4-1654-24PC153

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026