PartsTable
Technical Data Sheet
Download PDF

B3611-4 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B3611-4: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 AND PLASTIC OVERALL, end_radius: 0.250 INCHES NOMINAL IN, fork_depth: 0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, shank_length: 0.375 INCHES NOMINAL IN, thread_class: 2A ROD CONNECTION A, hole_diameter: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-273-0120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B3611-4
NSN: 5340-01-273-0120
FSC: 5340 — Hardware, Commercial
CAGE: 54184 — ARA, INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 AND PLASTIC OVERALL
end_radius0.250 INCHES NOMINAL IN
fork_depth0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
shank_length0.375 INCHES NOMINAL IN
thread_class2A ROD CONNECTION A
hole_diameter0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
overall_width0.563 INCHES NOMINAL IN
thread_length0.325 INCHES NOMINAL ROD CONNECTION IN
overall_height0.750 INCHES NOMINAL IN
shank_diameter0.375 INCHES NOMINAL IN
fork_span_width0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
special_featuresFORKS ARE TAPERED FROM 0.250 IN. TO 0.750 IN. IN
NSN5340-01-273-0120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B3611-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.375 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.094 INCHES NOMINAL IN
•
END RADIUS: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.325 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
FORK ARM THICKNESS0.094 INCHES NOMINAL IN
END RADIUS0.250 INCHES NOMINAL IN
THREAD LENGTH0.325 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.375 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.563 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B3611-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B3611-4?
B3611-4 is a CLEVIS,ROD END.
What is the NSN for B3611-4?
B3611-4 is cataloged in the U.S. Government catalog under NSN 5340-01-273-0120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B3611-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.