PartsTable
Technical Data Sheet
PartsTable / MRO / B32-95
B32-95 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include width: 2.000 INCHES NOMINAL IN, length: 5.000 INCHES NOMINAL IN, material: STEEL OVERALL, thickness: 1.500 INCHES NOMINAL IN, overall_width: 1.8750 INCHES NOMINAL IN, physical_form: INGOT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0623, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ B32-95
NSN: 3110-00-100-0623
FSC: 3110
CAGE: 14541 — COOPER MACHINERY SERVICES LLC (USA)
SPECIFICATIONS
width2.000 INCHES NOMINAL IN
length5.000 INCHES NOMINAL IN
materialSTEEL OVERALL
thickness1.500 INCHES NOMINAL IN
overall_width1.8750 INCHES NOMINAL IN
physical_formINGOT
outside_diameter11.3750 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.1250 INCHES NOMINAL IN
end_item_identification8527953-1 DIS, CONTROL STATION LOCAL
environmental_protectionCORROSION RESISTANT
nondefinitive_spec/std_dataSN35 COMPOSITION AND I FORM AND S TYPE
NSN3110-00-100-0623
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B32-95 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 11.3750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER11.3750 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OVERALL WIDTH1.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
NUMBER 8 FLUX 1GLInterchangeable
interchangeable cross-reference
interchangeable
ALPHA 611F FLUX 1GLInterchangeable
interchangeable cross-reference
interchangeable
MIL-F-14256 TYPE RMAInterchangeable
interchangeable cross-reference
interchangeable
SN35IS 5LBInterchangeable
interchangeable cross-reference
interchangeable
B32-95Interchangeable
interchangeable cross-reference
interchangeable
751-007Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B32-95?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B32-95?
B32-95 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace B32-95?
There are 16 known substitutes for B32-95: NUMBER 8 FLUX 1GL, ALPHA 611F FLUX 1GL, MIL-F-14256 TYPE RMA and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B32-95?
B32-95 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0623. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B32-95

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026