PartsTable
Technical Data Sheet
Download PDF

B32-94 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

B32-94: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 2.5000 INCHES NOMINAL IN, bore_diameter: 6.5000 INCHES NOMINAL IN, physical_form: PASTE, style_designator: NORMAL ANGLE, cone_corner_radius: 0.2812 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B32-94
NSN: 3110-00-100-3670
NIINs: 001003670, 013738475
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 14541 — COOPER MACHINERY SERVICES LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width2.5000 INCHES NOMINAL IN
bore_diameter6.5000 INCHES NOMINAL IN
physical_formPASTE
special_featuresTHE FLUX SHALL BE COMPOSED OF GUM ROSIN,WOOD ROSIN OR TALL OIL ROSIN HAVING A MINIMUM ACID VALUE OF 130 DISSOLVED IN,OR PLASTICIZED BY,A NONHALOGENATED SOLVENT; ROSIN MILDLY ACTIVATATED
style_designatorNORMAL ANGLE
cone_corner_radius0.2812 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
content_within_each_unit_package8 OZ OZ
NSN3110-00-100-3670
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B32-94 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.2812 INCHES NOMINAL IN
•
CONE WIDTH: 2.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 6.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.2812 INCHES NOMINAL IN
CONE WIDTH2.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER6.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
7140-02Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy B32-94?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B32-94?
B32-94 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace B32-94?
There is 1 known substitute for B32-94: 7140-02. Substitute compatibility should be verified for your specific system.
What is the NSN for B32-94?
B32-94 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3670. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B32-94