B317+LRX120-SR: VALVE,BALL.
The VALVE,BALL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING STEM, valve_size: 20.0 MILLIMETERS MM, connection_type: THREADED INTERNAL PIPE ALL ENDS, surface_treatment: NICKEL, frequency_in_hertz: 50.0 AND 60.0, operating_pressure: 600.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This part is cataloged in the U.S.
Government catalog under NSN 4820-01-718-2908, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL CORROSION RESISTING STEM |
| valve_size | 20.0 MILLIMETERS MM |
| connection_type | THREADED INTERNAL PIPE ALL ENDS |
| surface_treatment | NICKEL |
| frequency_in_hertz | 50.0 AND 60.0 |
| operating_pressure | 600.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS |
| maximum_operating_temp | 50.0 CELSIUS SINGLE RESPONSE DEGC |
| valve_operation_method | AIR |
| media_for_which_designed | WATER, FRESH SINGLE RESPONSE |
| voltage_in_volts_and_current_type | 100.0 AC AND 240.0 AC |
| part_name_assigned_by_controlling_agency | CHARACTERIZED CONTROL VALVE BALL STEM |
| NSN | 4820-01-718-2908 |
| FREQUENCY IN HERTZ | 50.0 AND 60.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 100.0 AC AND 240.0 AC |
| CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS |
| OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS |
| VALVE SIZE | 20.0 MILLIMETERS MM |
| MAXIMUM OPERATING TEMP | 50.0 CELSIUS SINGLE RESPONSE DEGC |
| SPECIAL FEATURES | A-PORT EQUAL PERCENTAGE, B-PORT MODIFIED FOR CONSTANT COMMON PORT FLOW; FOR FLUID CHILLED OR HOT WATER, UP TO 60 PERCENT GLYCOL; 3-WAY MIXING/DIVERTING, CV 4.7 CONFIGURABLE VALVE ACTUATOR, NON FAIL-SAFE; END FITTING INTERNAL NPT FEMALE ENDS THREADED; TRIM STAINLESS STEEL; BALL STAINLESS STEEL; POWER CONSUMPTION 2.5 W; IP54; NEMA 2; UL ENCLOSURE TYPE 2. USED IN AIR HANDLING UNITS ON HEATING OR COOLING COILS, AND FAN COIL UNIT HEATING OR COOLING COILS, UNIT VENTILATORS, SUITABLE FOR USE IN A HYDRONIC SYSTEM WITH VARIABLE OR CONSTANT FLOW. W |
| SURFACE TREATMENT | NICKEL |
| MEDIA FOR WHICH DESIGNED | WATER, FRESH SINGLE RESPONSE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CHARACTERIZED CONTROL VALVE BALL STEM |
No substitute or cross-reference records for this part.