PartsTable
Technical Data Sheet

B24FCF-21/2S — HANGER,PIPE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B24FCF-21/2S: HANGER,PIPE.

The HANGER,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316, special_features: INCL 2 INSERTS,W SCREWS AND 2 NUTS, style_designator: SPLIT RING, surface_treatment: PAINT, pipe_accommodation_diameter: 2.500 INCHES NOMINAL IN, supported_item_and_quantity: 1 PIPE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-349-5911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B24FCF-21/2S
NSN: 5340-01-349-5911
FSC: 5340 — Hardware, Commercial
CAGE: 19009 — LADISH CO TRI-CLOVER DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 316
special_featuresINCL 2 INSERTS,W SCREWS AND 2 NUTS
style_designatorSPLIT RING
surface_treatmentPAINT
pipe_accommodation_diameter2.500 INCHES NOMINAL IN
supported_item_and_quantity1 PIPE
material_document_and_classificationCOMP 316 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-349-5911
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B24FCF-21/2S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT RING
•
MATERIAL DOCUMENT AND CLASSIFICATION: COMP 316 ASSN STD SINGLE MATERIAL RESPONSE
•
SURFACE TREATMENT: PAINT
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
•
PIPE ACCOMMODATION DIAMETER: 2.500 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 316
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSPLIT RING
MATERIAL DOCUMENT AND CLASSIFICATIONCOMP 316 ASSN STD SINGLE MATERIAL RESPONSE
SPECIAL FEATURESINCL 2 INSERTS,W SCREWS AND 2 NUTS
SURFACE TREATMENTPAINT
SUPPORTED ITEM AND QUANTITY1 PIPE
PIPE ACCOMMODATION DIAMETER2.500 INCHES NOMINAL IN
MATERIALSTEEL COMP 316
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
13229E0864Reference document
Same NSN cross-reference
Reference document — Secondary reference
2218T5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy B24FCF-21/2S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B24FCF-21/2S?
B24FCF-21/2S is a HANGER,PIPE.
What parts can replace B24FCF-21/2S?
There are 2 known substitutes for B24FCF-21/2S: 13229E0864, 2218T5. Substitute compatibility should be verified for your specific system.
What is the NSN for B24FCF-21/2S?
B24FCF-21/2S is cataloged in the U.S. Government catalog under NSN 5340-01-349-5911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B24FCF-21/2S