PartsTable
Technical Data Sheet
Download PDF

B24-40-P3 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

B24-40-P3: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-078-3708, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B24-40-P3
NSN: 3020-01-078-3708
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 00328 — DESIGNATRONICS INCORPORATED DIV STERLING INSTRUMENTS DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
pitch_diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
pressure_angle20.0000 DEGREES
teeth_quantity40
special_featuresMTG HOLES 90 DEGS APART
style_designatorPROTRUDING HUB
surface_treatmentPASSIVATE OVERALL
face_nominal_width0.125 INCHES IN
hub_nominal_diameter0.312 INCHES FIRST END IN
NSN3020-01-078-3708
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN B24-40-P3 MFR GEAR,SPUR
KEY FEATURES
•
FURNISHED ITEMS AND QUANTITY: 1 SETSCREW
•
BORE NOMINAL DIAMETER: 0.125 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 0.312 INCHES FIRST END IN
•
TEETH QUANTITY: 40
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.187 INCHES FIRST END IN
TECHNICAL CHARACTERISTICS
FURNISHED ITEMS AND QUANTITY1 SETSCREW
BORE NOMINAL DIAMETER0.125 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER0.312 INCHES FIRST END IN
TEETH QUANTITY40
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
BODY STYLEPLAIN, SOLID
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.187 INCHES FIRST END IN
PRECISION CLASSIFICATIONQUALITY NUMBER 14
STYLE DESIGNATORPROTRUDING HUB
SUBSTITUTES & CROSS-REFERENCES 2
804651Reference document
Same NSN cross-reference
Reference document — Secondary reference
804651-1040Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B24-40-P3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B24-40-P3?
B24-40-P3 is a GEAR,SPUR.
What parts can replace B24-40-P3?
There are 2 known substitutes for B24-40-P3: 804651, 804651-1040. Substitute compatibility should be verified for your specific system.
What is the NSN for B24-40-P3?
B24-40-P3 is cataloged in the U.S. Government catalog under NSN 3020-01-078-3708. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B24-40-P3