Name: BEARING,ROLLER,NEEDLE
Brand: Unknown
SKU: B2125

B2125 ✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter

Verify connector type on BOTH ends — many SAS cables are asymmetric

PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, bore_diameter: 0.1566 INCHES MINIMUM AND 0.1576 INCHES MAXIMUM IN, overall_width: 0.2120 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-513-0014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ B2125

NSN: 5998-01-513-0014
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 28199 — L3 TECHNOLOGIES, INC. (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING
bore_diameter	0.1566 INCHES MINIMUM AND 0.1576 INCHES MAXIMUM IN
overall_width	0.2120 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
alignment_type	RIGID
surface_finish	GROUND
style_designator	NON-SEPARABLE, OPEN END, DRAWN SHELL
end_item_identification	ICAN; RADAR AND IFF SYSTEMS
overall_outside_diameter	0.2812 INCHES NOMINAL IN
standard_tolerance_designation	AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classification	66 FED STD 1ST MATERIAL RESPONSE OR SAE ASSN STD 2ND MATERIAL RESPONSE ROLLER
part_name_assigned_by_controlling_agency	CIRCUIT CARD ASSEMBLY - JUMPER
NSN	5998-01-513-0014

COMPONENT DIAGRAM

TECHNICAL CHARACTERISTICS (FLIS)

PART NAME ASSIGNED BY CONTROLLING AGENCY	CIRCUIT CARD ASSEMBLY - JUMPER
END ITEM IDENTIFICATION	ICAN; RADAR AND IFF SYSTEMS
PART NAME ASSIGNED BY CONTROLLING AGENCY	CIRCUIT CARD ASSEMBLY - JUMPER
END ITEM IDENTIFICATION	ICAN; RADAR AND IFF SYSTEMS

VERIFIED SUBSTITUTES & CROSS-REFERENCES 5

ASTM F 2162Interchangeable

interchangeable cross-reference

interchangeable

B-2 1/2 5Interchangeable

interchangeable cross-reference

interchangeable

B2 1-2 5Interchangeable

interchangeable cross-reference

interchangeable

B-3553 916662Interchangeable

interchangeable cross-reference

interchangeable

20-602 REV J ITEM NO 3Interchangeable

Same NIIN cross-reference

interchangeable

LIFECYCLE

StatusACTIVE

AvailabilityOEM and secondary market

RoHS CompliantEAR99ESD SensitiveNot HAZMAT

Ready to buy B2125?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is B2125?

B2125 is a BEARING,ROLLER,NEEDLE. It is classified as a MRO (MRO_GENERAL).

What parts can replace B2125?

There are 5 known substitutes for B2125: ASTM F 2162, B-2 1/2 5, B2 1-2 5 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for B2125?

B2125 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-513-0014. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

Comments (0)

No comments yet. Be the first to share what you know.

Request a Quote — B2125