PartsTable
Technical Data Sheet
Download PDF

B2-218-1 — SPACER,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B2-218-1: SPACER,SLEEVE.

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, temp_rating: 212.0 FAHRENHEIT DEGF, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 11.000 INCHES NOMINAL IN, aperture_width: 9.250 INCHES NOMINAL IN, overall_length: 16.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-641-3140, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B2-218-1
NSN: 5330-00-641-3140
NIINs: 006413140, 013153487
FSC: 5330 — Packing and Gasket Materials
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
temp_rating212.0 FAHRENHEIT DEGF
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width11.000 INCHES NOMINAL IN
aperture_width9.250 INCHES NOMINAL IN
overall_length16.500 INCHES NOMINAL IN
aperture_length14.750 INCHES NOMINAL IN
inside_corner_radius0.750 INCHES NOMINAL IN
outside_corner_radius0.750 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-641-3140
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B2-218-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 212.0 FAHRENHEIT DEGF
•
INSIDE CORNER RADIUS: 0.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 9.250 INCHES NOMINAL IN
•
APERTURE LENGTH: 14.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING212.0 FAHRENHEIT DEGF
INSIDE CORNER RADIUS0.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH16.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH11.000 INCHES NOMINAL IN
APERTURE WIDTH9.250 INCHES NOMINAL IN
APERTURE LENGTH14.750 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.750 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
5878Reference document
Same NSN cross-reference
Reference document — Secondary reference
BB22181Reference document
Same NSN cross-reference
Reference document — Secondary reference
86657HReference document
Same NSN cross-reference
Reference document — Secondary reference
H2942Reference document
Same NSN cross-reference
Reference document — Secondary reference
395438Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
9041861Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy B2-218-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B2-218-1?
B2-218-1 is a SPACER,SLEEVE.
What parts can replace B2-218-1?
There are 7 known substitutes for B2-218-1: 5878, BB22181, 86657H and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B2-218-1?
B2-218-1 is cataloged in the U.S. Government catalog under NSN 5330-00-641-3140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B2-218-1