PartsTable
Technical Data Sheet
Download PDF

B16-2-24 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B16-2-24: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, hole_diameter: 0.218 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, hardness_rating: 40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 7.312 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 5.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-097-4717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B16-2-24
NSN: 5330-00-097-4717
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
hole_diameter0.218 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
hardness_rating40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter7.312 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter5.312 INCHES NOMINAL IN
bolt_hole_quantity8
bolt_circle_diameter6.750 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-097-4717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B16-2-24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
HARDNESS RATING: 40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 7.312 INCHES NOMINAL IN
•
APERTURE DIAMETER: 5.312 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 8
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
HARDNESS RATING40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER7.312 INCHES NOMINAL IN
APERTURE DIAMETER5.312 INCHES NOMINAL IN
BOLT HOLE QUANTITY8
BOLT CIRCLE DIAMETER6.750 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy B16-2-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B16-2-24?
B16-2-24 is a GASKET.
What is the NSN for B16-2-24?
B16-2-24 is cataloged in the U.S. Government catalog under NSN 5330-00-097-4717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B16-2-24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.