PartsTable
Technical Data Sheet
PartsTable / COMPONENT / B16-1-1967
B16-1-1967 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The CASING ASSEMBLY,SHAFT is a the manufacturer industrial component. Key specifications include material: IRON, thickness: 1.125 INCHES NOMINAL IN, neck_height: 0.437 INCHES NOMINAL IN, flange_diameter: 8.250 INCHES NOMINAL IN, style_designator: ROUND, ONE BOLT HOLE CIRCLE, bolt_hole_diameter: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-025-0954, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B16-1-1967
NSN: 4730-01-025-0954
FSC: 4730
CAGE: 80204 — AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED DBA AMERICAN NATIONAL STANDARDS INSTITUTE (USA)
SPECIFICATIONS
materialIRON
thickness1.125 INCHES NOMINAL IN
neck_height0.437 INCHES NOMINAL IN
flange_diameter8.250 INCHES NOMINAL IN
style_designatorROUND, ONE BOLT HOLE CIRCLE
bolt_hole_diameter0.875 INCHES NOMINAL IN
bolt_hole_quantity8
raised_face_height0.062 INCHES NOMINAL IN
nominal_thread_size3.000 INCHES IN
bolt_circle_diameter6.625 INCHES NOMINAL IN
flange_section_styleRAISED FACE, RAISED NECK
raised_face_diameter5.687 INCHES NOMINAL IN
NSN4730-01-025-0954
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: B16-1-1967 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FACE SEATING SURFACE CONDITION: MACHINED
•
OPERATING PRESSURE AND TYPE: 250.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 250.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 250.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
•
RAISED FACE HEIGHT: 0.062 INCHES NOMINAL IN
•
REDUCER FLANGE HOLE TYPE: CONCENTRIC
•
FLANGE SECTION STYLE: RAISED FACE, RAISED NECK
•
RAISED FACE DIAMETER: 5.687 INCHES NOMINAL IN
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 406.0 FAHRENHEIT GAS AND 406.0 FAHRENHEIT OIL AND 406.0 FAHRENHEIT WATER DEGF
•
MATERIAL: IRON
TECHNICAL CHARACTERISTICS (FLIS)
FACE SEATING SURFACE CONDITIONMACHINED
OPERATING PRESSURE AND TYPE250.0 POUNDS PER SQUARE INCH (PSI) GAS MAXIMUM REQUIRED AND 250.0 POUNDS PER SQUARE INCH (PSI) OIL MAXIMUM REQUIRED AND 250.0 POUNDS PER SQUARE INCH (PSI) WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
RAISED FACE HEIGHT0.062 INCHES NOMINAL IN
REDUCER FLANGE HOLE TYPECONCENTRIC
FLANGE SECTION STYLERAISED FACE, RAISED NECK
RAISED FACE DIAMETER5.687 INCHES NOMINAL IN
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED406.0 FAHRENHEIT GAS AND 406.0 FAHRENHEIT OIL AND 406.0 FAHRENHEIT WATER DEGF
MATERIALIRON
THICKNESS1.125 INCHES NOMINAL IN
THREAD QUANTITY PER INCH8
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
S14593-902Interchangeable
interchangeable cross-reference
interchangeable
14593Interchangeable
interchangeable cross-reference
interchangeable
14593-902Interchangeable
interchangeable cross-reference
interchangeable
4515Interchangeable
interchangeable cross-reference
interchangeable
GGG-S-775 TY4SZ1Interchangeable
interchangeable cross-reference
interchangeable
5120-00-596-0980Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B16-1-1967?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B16-1-1967?
B16-1-1967 is a CASING ASSEMBLY,SHAFT.
What parts can replace B16-1-1967?
There are 8 known substitutes for B16-1-1967: S14593-902, 14593, 14593-902 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B16-1-1967?
B16-1-1967 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-025-0954. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B16-1-1967

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026